RTTS 1.03

RTTS V1.03:
Real Time Trigger Systems,
the ultimate tool for high speed photography

Easy to use, highly precise, reduction of cost and friendly to your nerves. 100% hit rate.

The Real Time Trigger Systems are specially developed to photograph very fast and free flying objects precisely. The RTTS makes the very exact synchronisation of measurement units (e.g. Oszilloscopes), flashes and/or cameras in realtime to free flying objects, like bullets, possible.

The RTTS are used in ballistics, forensics, defense technology, aircraft construction, material test, security, physical experiments and many other fields.

RTTS V 1.03: Parallel start of 2 Realtime Trigger

General technical data RTTS

- Highly precise speed measurement with 40 MHz resolution.
- Speed measurements from about 10 m/s upwards.
- Measurement of the PC and software response and CPU time during every measurement.
- Highly precise triggering of any projectiles with any rates to almost any distances. Even projectiles with projectile rates fluctuating very strongly are triggered very precisely.

That the cameraflash is triggered on the just fired, speed measured, and at that time on target flying bullet. It is guaranteed that the trigger is always done with extreme precision.

Technical data RTTS V1.03:

Two in Realtime calculated maintriggers make extremely long delay times available: After your input of the triggering distance into the computer, the system calculates speed and delay times and makes the hardware setup automatically.
The version 1.03 of the RTTS makes a maximum trigger time of 1.024 seconds per output available to the customer.
For example: In this time, a bullet in .308 is moving approx. 600 meters.
These data suffice for most extreme applications